New synthetic ice technology finally here!

Posted on 2014-05-24 by Tim

Finally there is a new technology available for synthetic ice that comes with an infused glide solution – that will not wear out!

SmartRink is now promoting their newest technology for synthetic ice! We call this the “SmartGlide” because it contains a glide additive that is found throughout the product.

But hang on a second, haven’t other companies been promoting this for some time already? Well yes they have, but the technology has never been that good frankly. in the case of one company the product actually feels “wet” and the silicon they use is seeping out of the material. What do you think happens when that continues to occur? What do you think happens when the product expands or contracts due to temperature changes? Presumably when that wet material leaches out then what is left behind is empty space and then the product will really start to wear down prematurely. This is one of several companies that advertise themselves as the “best in the world”. Well if that is the best then we would hate to see the worst! Other companies also claim to have mastered this complex manufacturing technique but when we have tested it out it just felt slow and indeed their clients have told us that they still need to add glide solution to the surface. Well that’s no good either.

So the R&D people behind our products decided to take this a step further and really examine another approach to making this work. What they were able to do was mix the dry resin with the glide additives in such a way as to create a product that was so thouroughly mixed that it actually feels “dry” to the touch but when skated on you can definitely notice the glide additives under the skate blades.

In the end we have produced a product that will not require the use of a sprayed on glide solution. And the best part is that it will never “leach” or “run” out of the sinter pressed sheet because it will be a single homogeneous sheet where the material in the centre of the sheet will be exactly the same as the material on the surface or the edges of the sheet.

So if you are researching or thinking about residential or commercial synthetic ice for your skating application then consider looking into the new SmartRink SmartGlide synthetic ice products.

They will outglide and outlast any of our competition.

Posted in General | Tagged | Comments Off on New synthetic ice technology finally here!

Synthetic ice goal crease

Posted on 2014-04-08 by Tim

It’s been a long time coming but finally the market has access to a proper NHL style synthetic ice goal crease!

SmartRink has always offered a goal crease for both residential and commercial synthetic ice rinks but frankly they didn’t look authentic enough. What we have typically done was machine a series of dots into the synthetic ice panels. This was a good system and certainly trouble free but the market told us they wanted something more professional looking. So we listened, and we challenged the R&D department to come up with something fantastic. They did not disappoint!

Some of our synthetic ice competitors had a good looking crease but upon closer inspection it was simply just not well designed. The ones we are familiar with were simply colored panel material fit into a opening without any positive connections to the surrounding panel system. This is an inexpensive method to make a crease but certainly not a solid design.With this design the crease panels are not locked into place and because they “float” the puck will “skip” over the crease area which is problematic. The issue is even more pronounced when the temperature fluctuates and the colored crease material expands and contracts at a different rate than the non crease panels. Big Problem!

But again, the SmartRink R&D department hit it out of the park and came up with a brilliant design that works with both our ProFast1500 and ProFast1800 series products. When this crease is completed its as if it was one single piece of material – its that strong! The puck smoothly crosses the crease panels no different than any other part of the rink. Inside or outside, this synthetic ice goal crease is top of the class in strength, durability, glide and looks.

If you are interested in getting more information about this crease product please contact us now!

Posted in News | Tagged , , , , | Comments Off on Synthetic ice goal crease

Hockey Lines and Creases for Synthetic Ice Rinks

Posted on 2014-03-27 by Tim

Hockey lines and creases for synthetic ice rinks need to be safe:

We receive inquiries everyday about the possibility of adding hockey lines and creases to synthetic ice rink products. Well the good news is that it is certainly possible. The bad news is that not many systems out there actually do it in a quality manner. Read on and I’ll explain. From what I have seen out there in the field many suppliers and re-sellers simply try to “loose lay” the lines and creases between the full panels of dovetail style synthetic ice. This is an extremely poor method of trying to add hockey lines and creases for synthetic ice rinks. Here’s why. First of all the substrate surface would have to be laser leveled and perfectly flat for this to work. It might work on the factory floor but introduce variables such as uneven asphalt or concrete and you’ll have a frustrating and unsafe installation on your hands. I have witnessed firsthand how pucks will not glide over this type of hockey line or crease for synthetic ice rinks. The market likes the do-it-yourself ease of the dovetail style joint system. Everyone sells one. But how we do hockey lines and creases for synthetic ice rinks is we actually machine the “lines” and goal creases into the panel – so that they are actually part of the panel.

Synthetic ice creases can be can have different looks

hockey lines and creases for synthetic ice rinks

Synthetic ice goal crease on the SmartSkate8000 product

We aren’t saying this is the “prettiest” or most authentic looking method by any stretch – but it looks quite good and more importantly it works excellent with puck movement and is completely safe for the skater. Now if you are really serious about looking pro then we can do that too. With our commercial lineup of synthetic ice we use a commercial grade connection system. You see – anyone that sells a standard dovetail system and calls it “commercial” grade needs a lesson in strength of connection systems. We sell three system that would qualify as a “commercial” grade because the horizontal and vertical tear apart strength is significantly greater than a standard dovetail system. Anyway – our commercial grade systems use solidly connected hockey lines and creases for synthetic ice rinks. And yes they are more expensive! But they look awesome, they are safe for the skater in any weather, and the puck nicely glides over them.

Hockey lines and creases for synthetic ice rinks for any indoor or outdoor application

hockey lines and creases for synthetic ice rinks

Commercial Synthetic Ice NHL Goal Crease

So if you happen to be in the market and are looking for hockey lines and creases for synthetic ice rinks then look no further. Call us and we can discuss your application and options.

Posted in General | Tagged | Comments Off on Hockey Lines and Creases for Synthetic Ice Rinks

Cave and Basin Synthetic Ice, Banff Alberta Canada

Posted on 2014-01-26 by Tim

So here is the newest SmartRink project using our ProFast1800 heavy duty severe climate connection system for our synthetic ice. It’s no coincidence that clients are asking us for this connection system because they know just how awesome it is. It doesn’t matter if there is snow, ice, freezing temperatures or a heat wave, this connection system is the only one that will prevent the typical problems known to be caused by expansion and contraction of synthetic ice floors.

What is also really interesting about this synthetic ice video is that we get to show off just how well this product works without any glide solution added to the surface. The ProFast1800 material uses a dry slip additive as part of the manufacturing process. I can tell you first hand (just watch the video) how well it works. When the spray on glide enhancer is added the product can’t be beat in terms of realistic glide action for synthetic ice.

Cave and Basin is a National Historic Site developed and run by Parks Canada. The SmartRink synthetic ice surface installed here has become part of the multi million dollar restoration and enhancement of this beautiful historic site located in Banff Alberta. The site is surrounded by soaring mountains and might just be the most spectacular rink setting we have ever built.

Posted in General | Tagged , , , | Comments Off on Cave and Basin Synthetic Ice, Banff Alberta Canada

Synthetic ice…even in the coldest climates.

Posted on 2013-12-29 by Tim

SmartRink Synthetic Ice recently installed the new Millenium Square Synthetic Ice Rink in Pickering Ontario. A lot of people have asked me why would a place like Pickering Ontario need synthetic ice? That’s a great question. The fact is when we installed the surface it was a balmy minus 21 that day! But the reality is that in another week it could be plus 10 and real ice just won’t hang around long in that kind of weather. So for a community synthetic ice rink like this one, it provides a very predictable skating surface day in and day out.

The week after we installed the surface they had a major ice and wind storm which frankly is not great skating weather on any kind of rink. Cleaning the synthetic ice surface, just like real ice, would have to be maintained on a regular basis. But once the weather calms down a bit it will be skating as usual on this heavy duty synthetic surface.

The Millenium Square synthetic ice surface will be open daily from 9:00 am to 9:00 pm. Sharp skates are recommended. Go check it out. Have fun, bring a friend or your family.

Posted in General | Tagged , , | Comments Off on Synthetic ice…even in the coldest climates.

Heavy Duty Synthetic Ice

Posted on 2013-12-14 by Tim
heavy duty synthetic ice

SmartRink is a company that actually does have a heavy duty synthetic ice system. Other companies may call their system “heavy duty” or “commercial” synthetic ice…but those interested really need to know what to ask the venders of so called “heavy duty” synthetic ice. They can call it whatever they want to but please don’t embarrass anymore by continuing to call your product “heavy duty” becasue very simply it isn’t.

The strength of conversely the weakness of any synthetic ice system is both the material and the connection system. First of all let’s focus on the connection system. A dovetail system is not a heavy duty system. It does not matter if it has a patent or not. Having a patent does not make it heavy duty. Having a connection system that won’t come apart is a step in the right direction however. Dovetail or jigsaw connection joints are very common. They have decent horizontal pull out strength but they have almost no vertical strength in terms of coming apart.

In terms of shear strength, there is absolutely no equal on the market today of the SmartRink H-Tongue Heavy Duty connection system. Any company out – please take on the challenge – we’ll do a test anytime for vertical pull out strength. The only product that might come marginally close would be those companies using the plug / dowel / flat tongue connection system. We have used that as well but in a large scale project it’s not practical becuase of the time it takes install it. But it does do the job quite well.

The second criteria for being “heavy duty” is the material. North American sellers use extruded sheet material. Extruded material simply wears out faster. Any standard industry lab test shows this. The results are clear. Sinter pressed sheets kick the heck out of extruded sheets anytime in any test. The simple reason being is that sinter pressed sheets can use a much higher molecular weight resin. It’s far more abrasion resistant and will therefore last far longer.

So the next time you see a seller of synthetic ice claiming to have heavy duty panels you’ll know what to ask about. Chances are they will just start dropping their prices because they know they can’t compete in this category unless they are much less expensive – and even then it’s comparing apples to oranges.

Posted in General | Tagged , , | Comments Off on Heavy Duty Synthetic Ice

Sales of Synthetic Ice

Posted on 2013-12-08 by Tim

Tis the Season! Then again it seems it’s always the season for hockey training these days! It’s become a year around sport for training, and what better way than to have sales of synthetic ice year round as well. Players want to be able to train when they want, where they want. More importantly – so do their parents! I can tell you first hand how awesome it really is to have your kids grab their skates and head down to the garage rink and take a few hundred shots.

When I decided to get into sale of synthetic ice I knew that it was going to have to be a better product than what my kids had been paying to practice on at a private training facility. Whatever it was it was extremely difficult to turn on and forget about doing a nice smooth pivot. Basically it was only good enough to takes shots with skates.

I discovered a company in Europe that manufactured sinter pressed synthetic ice and once we tried that it was all the difference. When people skate on our panels they notice right away that something is different from the typical EXTRUDED panel material. Not only are they gliding better but there is no tell tale white dusty powdery residue coming off the surface. In our home rink that’s been skated on for years there is nothing to clean up on the synthetic ice surface – except dirt. Sales of synthetic ice proved to be a rewarding experience as well because not only did our clients really love our product, but it got my kids involved in the business from time to time doing exhibitions, skating demos, and taking care of the home practice rink.

SmartRink is a Canadian company that started sales of synthetic ice from scratch back in 2007. Since then we have become the largest Distributor and reseller of OKULEN and NOICEONE in the world. We have sales of synthetic ice all over the world and have successfully built hundreds of rinks during this time. Our biggest sale of synthetic ice was a full sized surface including all the hockey lines and markings. Its located at the Horizon Camp outside of Fort McMurray Canada. We believe it to be the largest permanent synthetic ice rink in the world. Others have tried where we have succeeded.

Sales of synthetic ice is not always easy. There are significant technical challenges especially in climates where the temperature variance between winter and summer can be a swing of 70 degrees centigrade. We compete and have sales of synthetic ice in these climates because we understand the value of a proper application based joint connection system. Other synthetic ice companies attempt to say that their system is “heavy duty” – but ours truly is and we have the data to back up this claim. Heavy duty synthetic ice is not a term describing the thickness of the material – but it refers to the material in combination with the connection system. If you are interested in sales of synthetic ice and a company suggests their “heavy duty” system – simply ask them to show you their test results for “sheer pull out strength”. Those test refer to horizontal AND vertical pull out strength tests. I certainly know of several rink failures that wished they had understood what these terms meant! They would would have selected a different product. But life is a lesson and we try to educate the industry one application at a time. We love sales of synthetic ice as much as our competitors do but we do not compromise skater safety and our success rate by sales of synthetic ice that are less than what a client deserves.

Some of my competitors in sales of synthetic ice say they have been in the business for over 30 years and that if not for them there would not be a synthetic ice industry!! Well, to them I say then they should know better and learned more! How can they still be selling panels that come apart with a temperature change? When it comes to sales of synthetic ice – please do your homework!

 

Posted in General | 1 Comment

Sinter Pressed Synthetic Ice Panels

Posted on 2013-10-27 by Tim

SmartRink Synthetic Ice…how can synthetic ice be so different?

You keep reading about all these synthetic ice products – so what about SmartRink Synthetic Ice? What makes it different? Why do we claim SmartRink Synthetic Ice is unique?  Is it really a better performing product?

The fact is that SmartRink Synthetic Ice is different from all other synthetic ice products. I recently attended a sports trade show in Germany – the biggest show of it’s kind every two years. There were four suppliers of synthetic ice at this show – mine was not on display at this show. For the record none of these suppliers are the actual manufacturer of the material – some suppliers would have their clients believe this is an important factor when it comes to synthetic ice but frankly it’s mostly irrelevant in my opinion. I skated on all four products using the same borrowed skates. I am not going to mention any brands here in this post but one of them was clearly a superior product in terms of it’s glide performance. I am aware of the company who manufactures this product. There was also one product that in my opinion was at the bottom of my list in terms of performance. The other two companies I would say were very close – and also quite good in terms of performance. What was really ironic I thought was that the product on the bottom of my list was also the only one I was familiar with competitively. They are an aggressive, slick marketing company and they appear to be well financed also. But now after skating on this product I can confidently say they do not have the best product, in fact not even close to it. So what was the value in skating on these synthetic ice products? It confirmed to me that SmartRink synthetic ice is in fact different and unique.

So what makes SmartRink synthetic ice so unique?

SmartRink uses sinter pressed synthetic ice panels. I believe that at least two possibly even three of the products I skated on were also sinter pressed. The fourth one may have been but it was so obviously a lower quality material. The tell tale sign of a higher molecular weight sinter pressed material is how much residue comes off the surface and sticks to your skate blades. I used this test on each of the four products. In the case of the “worst” product at this show I wiped off a significant amount of plastic residue off the blades. In the case of the “best” product there was almost none.  The two other products that were fairly close in performance there was minimal residue. In comparison when you skate on SmartRink sinter pressed synthetic ice panels there is also almost no residue to wipe off the skate blade.

So what is so special about sinter pressed synthetic ice panels?

From a North American perspective sinter pressing is practically non existent when it comes to synthetic ice. Of the products I tested at this show the “worst” product may indeed be sinter pressed but if it is the material is almost certainly pressed using a low molecular weight resin. By comparison the SmartRink synthetic ice material has several grades of popular skating material – neither of which sheds residue like the one I skated on in Germany. The vast majority of products offered in North America are extruded material. By the nature of the extrusion process the material used in extruded synthetic ice material is a lower molecular weight as a higher molecular weight resin will not work with this process. Sinter pressing on the other hand is not restricted in this way.

So suffice to say, SmartRink synthetic ice is likely not the only product in the world that uses sinter pressed material. To the best of my knowledge however, it may be the only one offered in North America at the time of writing this – or at very least, the only one using an optimal molecular weight resin that results in a superior skating performance. So performance is certainly important to the skater, but so it abrasion resistance. That means the material will stand up to skating over a longer period of time – it will last longer. North American producers claim that their products are superior. Well I would challenge any North American seller of synthetic ice to take their standard offered panels to a third party lab, and I will do the same and run standard tests that will prove my points on both skating performance and abrasion resistance.

So is there something else that makes SmartRink synthetic ice a unique product? Absolutely. Our ProFast line of engineered material is not off the rack polyethylene sheet simply machined into synthetic ice panels. This trademarked ice-y-blue700 material is unique. This is a Very High Molecular Weight Pe resin mixed with slip additives that improve the overall glide and efficiency of this skating material. We have tested this material to be significantly less effort to skate on verses other popular molecular weights used in synthetic ice skating material such as HDPe as example.

The factory actually developed a standard testing method using a weighted skate. You can see an image of this test on the home page of our SmartRink synthetic ice website. Using a weighted skate test the factory lab measures the force or “skating effort” required to move the weighted skate blade across certain material.

Our competitors do not like this test because most of them use extruded material and this test could make products look bad. From our perspective however, it is the only fair test to measure a products performance. There are standard industry tests for material abrasion resistance, notched impact resistance, and coefficient of friction – but unfortunately these are not as relevant directly to skating performance. These tests were developed for non-skating, standard industrial specifications where this type of material is frequently utilized.

At SmartRink synthetic ice we want our potential customers to understand what it is they are buying and what kind of thought went into our product because we are proud of it. We want people to clearly understand the difference between a sinter pressed product and an extruded product. We want you to be educated. You may still buy someone else’s product, but at least we hope you understand the trade off.

I will end this post on a humorous note from the sport show in Germany. Not knowing who I was, I asked one of my competitors what the material was made of and was told it was “secret”. I chuckled because I knew that response was coming. That’s what they always say.

Good luck in your research, and as always, if you need help with your decision on what product will work best for you please call us toll free at 1-855-461-7465 or send us an email at info@smartrink.com

 

 

Posted in General | Comments Off on Sinter Pressed Synthetic Ice Panels

Worlds Largest Synthetic Ice Backyard Rink

Posted on 2013-10-22 by Tim

What an amazing synthetic hockey rink project this was. We converted a backyard asphalt tennis court into one of the nicest looking synthetic ice rinks in the world. This rink was completely tricked out with blue lines, centre red line, faceoff dots, goal creases and goalines. This family is not only hockey crazy but they also play lacrosse – so at their request we added an additional crease outside the hockey goal crease for lacrosse. This was a first in the world that we are aware of.

This project used our SmartRink Profast1500, the same one that we used in Gladstone, MO, and Tenjin Hikari Square, Japan. This “hybrid” connection system uses a very unique perimeter male and female continuous ridge that is extremely tight fitting. As a result it requires a fair degree of “persuasion” to assemble. We accomplished the task using 3 pound hammers and some solid plastic blocks placed over the joint.

These panels are called “hybrid” though because we can use the above mentioned connection systems as well as the H-Tongue connection system for the areas with solid line markings. This means SmartRink synthetic ice line markings are positively and solidly connected to the panels on either side of the lines – a massive advantage over our competitors who prefer to “loose lay” their lines inside surounding panels.

This rink measured 115ft x 51ft and the almost 6,000 square feet took our crew of 4 the better part of 1.5 days to lay down. There was a lot of downtime from crew having to cart panels into the work space as there was fencing around the entire perimeter.

Then the molded board system was installed over the synthetic ice. There is always the issue of expansion and contraction of the synthetic ice so we had to calculate seasonal temperature variations and determine exactly how the boards should be positioned. We were able to utilize the existing fence posts from the tennis court to secure half of the boards and then we used a new asphalt anchoring system for the other half. The anchors holes were drilled with a hammer drill and then filled with a quick drying mortar before the anchors were inserted. The anchors had a threaded sleeve for the 4 inch hex bolts and they worked like a charm.

The boards and netting took another day and a half but well within four days the rink was completed and ready for the first skate. This video shows the first game played on the surface. Since this was fall and breezy there was some debris on the surface from the overhead trees but otherwise the synthetic ice surface was a huge hit!

Learn how to invest in your own backyard synthetic ice rink!

Posted in General | Tagged , | Comments Off on Worlds Largest Synthetic Ice Backyard Rink

Skating on Synthetic Ice is Easy

Posted on 2013-10-13 by Tim

I’ve heard it all when it comes to skating on synthetic ice. I’ve heard that you can’t move, or turn or stop or pivot. Recently one goalie coach who trained players on synthetic ice insisted that you could not skate backwards on it. Wow was he ever surprised when he tested our product and saw how easy it was to move backwards and pivot and transition.

This is just another example of the mis-information that is out there about synthetic ice material. That is not to say there is not poor products being sold out there, there certainly is! And maybe that is a large part of the problem. Maybe that is why the industry still feels like it’s mired back in 1980 when there was nothing but poor products. That is why SmartRink is so dedicated to educating potential buyers about the differences in synthetic ice skating material. That is why we can safely and confidently say that skating on synthetic ice is easy.

So how can a buyer try to distinguish between a good quality product, a poor quality product, and an exceptional quality product. It starts with the raw material and how that rw materal is manufactured into a synthetic ice sheet.

SmartRink products are sinter pressed sheets. Sintering the sheet makes all the difference. Recently in a head to head trial of our product verses a leading brand of extruded product the overwhelming consensus of the comparison for skating performance was that our product delivered a superior skate. The glide was superior and more realistic. To be fair some skaters preferred the stopping action of the extruded sheet material, probably because the resistance of the product was greater than ours – but that is just speculation. One very noticeable difference was the amount of material residue that was displaced from skating on our competitors panels. It was incredible actually to see the difference first hand. Stopping on their product produced a handful of white dusty powdery residue, whereas stopping on the SmartRink material resulted in producing only a fingertip worth of fibre like material, you could hardly even see it.

So in a nutshell why is our product easier to skate on? Our panels are SINTER pressed. This is a process of applying great pressure under both high temperature and lower temperature conditions. This not only deivers better skating performance but allows us to offer a product that is incredibly abrasion resistant – meaning it will last much longer than an extruded material.

At SmartRink we say that skating on synthetic ice is easy. Really we should be saying that skating on SmartRink synthetic ice is easy!

Posted in General | Tagged , | Comments Off on Skating on Synthetic Ice is Easy